Home > Knowledge

What are the regulations for loading and unloading mining electric locomotives?

2022-12-03

What are the regulations for loading and unloading mining electric locomotives?

What are the regulations for mining electric locomotives when loading and unloading materials? Generally, different mines have different management regulations, but the concepts and standards are similar. The core is how to improve efficiency while ensuring safety. This article introduces a relatively common standard, and briefly introduces the general regulations for mining electric locomotives when loading and unloading materials.

The first is how to choose the form of material handling. Generally, there are three forms of material handling: single-person handling, multi-person handling (two or more people), and use of handling equipment.

It is recommended that the weight of a single person should be limited to 30kg. A relatively low limit can not only ensure safety, but also allow people to have sufficient physical strength and energy to face the next work. It is recommended to limit the weight of multiple people to less than 100kg, and it is recommended to use special lifting equipment and handling equipment for materials that are too large and heavy.

Before handling, it must be confirmed that the car has stopped steadily to avoid safety problems such as slipping during loading and unloading.

When handling manually, gloves and other protective equipment must be worn. Coordinate handling with slogans or pre-arranged actions to avoid accidents caused by problems such as uneven steps. The loading and unloading process should be handled with care to avoid bumps and injuries. When loading and unloading materials, they must be loaded and unloaded in a safe order, and cannot be loaded and unloaded at will. For example, when taking materials, it should be from top to bottom, from outside to inside. At the same time, it is strictly forbidden for personnel to stand in the forward direction of the material to prevent the material from slipping and hurting people.

When using the equipment, the user must be a certified person who has passed the training, and the equipment can only be used after confirming that there is no problem or even failure. When moving materials, carry them in accordance with the corresponding operating regulations and equipment parameter restrictions, and at the same time, it is forbidden for people to stand on the movement path of the equipment.