How to ensure the safety of mining locomotive when transportation?

The Mining locomotive is mainly used in the coal mine in the coal mine. It is often reported in the coal mine. It is often reported in the coal mine. It is because the motor vehicle transportation management is weak. In order to prevent the tragedy from happening again, the driver should comply with the transportation when using motor vehicles. Regulatory system, what rules and regulations when using motor vehicle transportation?

 

1, train or alone locomotive must have illumination, there is a red light, normal operation, the locomotive must be at the front end of the train. On the same zone orbit, non-motor vehicles must not be driven. If you need to travel, you must agree with the downhole transportation schedule station.

2, the damper through the train must be provided with an apparatus capable of receiving a sound and optical signal on both sides of the damper when the train passes. Road sign and warning should be installed within the roadway. Locomotive Language Roadway, 硐 room port, curve, routing, slope large or noise, and the speed must be reduced when there is a vehicle or visibility, and a alarm is issued.

3. There must be useful mine lamp to send emergency parking signals. Non-hazardous situations, no one may use an emergency parking signal. When two locomotives or two trains travel in the same direction in the same orbit, there must be no less than 100m. The locomotive driver must work according to the signal directive, and the driving signal must be issued before driving. In the operation of the locomotive, it is strictly forbidden to control the car outside the body. When the driver leaves the seat, the electric power supply must be cut off, and the controller will remove the hand, and the brake is pulled, but the light is not closed.

4, the braking distance of the train determines at least once a year, and must not exceed 40m when transporting materials; the transport personnel must not exceed 20m. The train busbar closure signal should be set in the section of the radiator or the driver's sight. Do not top the car (such as the special case, the car is slow, the speed is slow, there must be hanging chain workers in front of the front, and the serial chain of the mine machinery car).

5. Drivers driving the driving must check the stable reliability of the large piece in the car, confirm that the driver can drive, driving in low speed and smooth driving. Signal concentrated occlusion systems should be set in large mines in large mines and transportation in new or changed expansion.

 

So in order to protect yourself and others, the driver should keep the motor vehicle transport rules before operating the mine.