What matters should be paid attention to before the installation and trial operation of the battery electric locomotive?

2021-04-21

Most novices do not know how to use and install the battery electric locomotive for the first time. The installation of the battery electric locomotive is also a big knowledge. If the installation is not careful, the electric locomotive may not work normally. What should I pay attention to?
Requirements before the trial operation of the battery electric locomotive:
1. Before installation, be sure to check the mechanical parts of the battery electric locomotive.
2. The battery electric locomotive needs to be fully charged before it can be tested. Therefore, before installation and commissioning, be sure to charge the battery with electrolyte for 72 hours. First of all, the density of the electrolyte should be measured first. The density should be between 1.28 (when charging) and 1.32 (after charging). Secondly, open the battery cover when charging, pay attention to the electrolyte level to cover the electrode plate, if it is lower, add distilled water. In addition, when the temperature is too high during charging, water needs to be added to cool down. In this way, the battery can be transferred to the electric locomotive after it is fully charged. If the charging is not full for 72 hours, it will affect the battery life (emphasis!)
 
Requirements for the installation and use of battery electric locomotives
After checking the mechanical parts and charging, you can put the battery electric locomotive on the track for installation and debugging.
First, adjust the light through the button on the direct converter, turn on the horn and LED light, and see if it can be turned on normally. Debug the master controller, dial the forward and reverse gear, and see if the battery electric locomotive can move forward and backward normally. Able to complete these two steps normally, it means that your battery electric locomotive can operate normally!