How to reduce the probability of failure of the mining muck loader?
In the field of tunnel shaft excavation, it can be said that the mining muck loader is the most important application in mining equipment. Some users reported that the equipment often has some failures, which will delay the normal slag discharge progress and easily delay the construction period. Also increased the production cost of the enterprise simultaneously. This is mainly due to carelessness during use.
First of all, we need to maintain the equipment regularly. In actual work, sometimes in order to catch up with the deadline, there is often a phenomenon of continuous work for 24 hours. Then, during long-term work, some screws in the mining muck loader will become loose. If it is not reinforced in time, it will damage the machine. This is likely to delay its normal production work. At the same time, when checking the screws, it is also necessary to check the lubrication of some places. After a period of use, the internal lubricant will be less lubricating. Especially some positions such as the pin shaft, the bull's head, and the mouth of the shovel. Therefore, the lubricating oil should be replaced in time every time it is used for a period of time.
Secondly, it is necessary to pay attention to the use of hydraulic oil. Because the mining muck loader is a fully hydraulic device, the work of each mechanism is controlled through hydraulic parts. When these mechanisms work, it is easy to increase the oil temperature. If the heat cannot be dissipated in time, it will make the whole device weak and boring. Therefore, when we use it, we must always pay attention to the use of hydraulic oil.
In order for the mining muck loader to work normally, it needs to do the above points. The mining muck loader cannot be allowed to have the above situations. Only in this way can the probability of equipment failure be avoided.
