What should be paid attention to when parking the rock loader?
After the rock loader finished its work, it needs to stop running. There are some matters that need to be paid attention to. Here, we will summarize the matters needing attention when the rock loader is out of service.
1. It is forbidden to use the steering rod and joystick as handrails to load the rock machine up and down.
2. The rock loader should be parked where the floor of the roadway is relatively flat as much as possible. When it must be parked on a slope, measures to prevent sliding should be taken.
3. After the rock loading is completed, the rock loading machine backs away to a safe place 50m away from the front.
4. Do a good job of equipment operation records and on-site shift records.
5. Before shooting head-on, raise the bucket of the rock loader to cover the lighting, pin the travel switch, cut off the power supply, turn the handle of the master switch to the stop position, and lock it with a safety lock. After shooting, put the bucket on the ground in time .
The correct use method can not only improve the working efficiency of the rock loader, but also effectively protect the rock loader, so we must follow the above methods when using it.
