How to prevent the derailment of 10-ton mining trolley locomotive?
If you want to know how to prevent the derailment of 10-ton mining trolley locomotive, you must first understand the reasons for the derailment of 10-ton mining trolley locomotive.
The derailment of 10-ton mining trolley locomotive is obviously related to the two aspects of the locomotive and the track. Therefore, the reason is also to be found in this direction. There are roughly the factors of the electric locomotive itself, the track factor, and the combination of the two.
The factors of the locomotive itself include wheelset failure, loose hubs, etc., broken brackets, and excessive speed of the locomotive. The track factors are also mostly loose fasteners, the outer rail is not heightened, the curve radius is too small, and the sleepers are rotten. The cooperation between the two, such as the gauge error is too large.
Obviously most problems can be solved with serious routine maintenance. The remaining problems such as the height of the outer rail and the radius of the curve should be well designed during the construction, and the follow-up mainly depends on the actual situation to correct. And the problem of electric locomotives being too fast. The first is to rely on the training of drivers, so that drivers have good safety awareness. Secondly, an anti-derailment device can be installed. The principle is to use the speed sensor to detect the speed of the electric locomotive in real time. When the speed of the electric locomotive reaches a certain value, it will start to alarm, signal the driver to slow down, and automatically brake when it reaches a dangerous speed.
The above is a brief introduction on how to prevent derailment of 10-ton mining trolley locomotive.
