Factory directly sell ZQ-26 rail mucking shovel loader Technical parameters

Electric bucket loader can be applicable to prospecting or excavation roadway with section (2.0m×2.2m) and horizontal or inclination angel less than 80°. The loaded materials include hard granite, iron ore and nonferrous metal ore, as well as general rocks, sands and salt particles. The maximum size of ores can be 500mm; however, the highest loading efficiency can be guaranteed if ore diameter is below 200mm.

The ZQ-13 Pneumatic Rock Loader use air as the power source to supply the machine work.
It has a range application such as in metal mines coal mines and with great working efficiency.
It is a single-bucket orbital rock loader that directly unloads. Its main purpose is to load the rock and ore from the blasting caving in the mine cart.
It can also be used to load rocks and coal in the open air. Blocks limestone or sand etc. which to realize the mechanization of loading work.
The application work surface should be 1.8*2.5m.


With the bucket capacity 0.26m³ and productivity 60m³/h, this ZQ-26 pneumatic Rock Shovel & Rock Loader is mainly applied in mine, national defense, railway, water conservancy to load rock, gravel, ironstone, granite, etc. Its loading blockness reaches 500mm. When the blockness range 200~300mm, loading efficiency is the highest. This kind of rock loader is bucket type, front-loaded and back-unloaded.