China ZQ-26 electric rock loader Technical parameters

rock loader is widely applied in the following two situations, one is the the horizontal tunnel rail without explosive gas, another is inclined tunnel well at 8 degree, which can be also used to load and transport other lumps or granular materials. this rock loader shall be used in the roadway which is not less than 2.2mm(from the rails surface). 

The ZQ-13 Pneumatic Rock Loader use air as the power source to supply the machine work.
It has a range application such as in metal mines coal mines and with great working efficiency.
It is a single-bucket orbital rock loader that directly unloads. Its main purpose is to load the rock and ore from the blasting caving in the mine cart.
It can also be used to load rocks and coal in the open air. Blocks limestone or sand etc. which to realize the mechanization of loading work.
The application work surface should be 1.8*2.5m.


Electric bucket loader can be applicable to prospecting or excavation roadway with section (2.0m×2.2m) and horizontal or inclination angel less than 80°. The loaded materials include hard granite, iron ore and nonferrous metal ore, as well as general rocks, sands and salt particles. The maximum size of ores can be 500mm; however, the highest loading efficiency can be guaranteed if ore diameter is below 200mm.