What should we pay attention to when using a mining muck loader?
The mining muck loader has the advantages of beautiful appearance, low fuel consumption, wide operation range, and suitable for construction operations in small spaces. It can reduce maintenance and operating costs, liberate labor, improve the degree of mechanization, and low cost. The following should be noted when using it:
1. The bell must be rang before starting the machine. After confirming that there is no person near the loader, the oil pump motor can be started, and the operation can be started gradually.
2. There must be a special person to pull the cable at the tail of the mining muck loader and be responsible for the signal worker to ensure that the cable is not damaged by tension and crushing.
3. Frequent inspection and maintenance, especially each rotating shaft should be filled with high-pressure butter before every shift, not less than once a day.
4. Fixed full-time drivers, conduct serious training before taking up the job, and unlicensed personnel are not allowed to start the equipment at will, so as to avoid the harm of equipment damage and cable breakage.
5. During the operation of the mining muck loader, stop the handle operation every 15-25 minutes, check the gas instrument and look around the roadway.
