Explosion-proof 500mm track gauge 60m3/h loading capacity remote control rock loader Technical parameters

rock loader is widely applied in the following two situations, one is the the horizontal tunnel rail without explosive gas, another is inclined tunnel well at 8 degree, which can be also used to load and transport other lumps or granular materials. this rock loader shall be used in the roadway which is not less than 2.2mm(from the rails surface). 

ss="15" style="text-align:justify;color: rgb(0 0 0); font-size: medium; margin: 0pt; text-indent: 32pt; line-height: 1.55px;"> Pneumatic rock loader is a orbital loader with single bucket directly unloaded its main use is loading the rocks and ore blasting down the breakout into the mine car loading rock coal limestone or sand etc in the open air also.

Pneumatic rock loader fbr rail gauge 600 mm height at 2.25 meters above the roadway roadway width of 1.8-2.5 m slope less than 8 ° of the horizontal roadway work .

The packaging material a very wide and can load a variety of hard rock and ore the maximum size of rock can be installed up to 500 mm 200-300 mm in size rocks within the best efficiency.

Pneumatic rock loader structure is compact convenient and reliable operation good sealing dust-proof  moisture resistant.

It can working in a gas and flammable gas environment because of the use of compressed air power source.

This pneumatic Rock Shovel & Rock Loader is compact in structure, which satisfies narrow roadway. It is stable in operation, with no need of maintenance at the front 2000 hours.